Openstep Installation Guide

admin

OPENSTEP Installation Guide

What is this?

OPENSTEP was an operating system created by NeXT Software Inc. It served as the basis for Mac OS X after Steve Jobs came back to Apple after Apple acquired NeXT. This is simply to teach and show computer history.

Openstep

It should say bad magic and find the cd drive follow install instructions if done right it should find the hard drive. If you get stuck you can call me at 303 741-9998 or drop an email to sales@blackholeinc.com We have NeXTSTEP and OpenSTEP operating system and Y2k iso images. Mar 17, 2019 OpenSUSE Leap 15 installation guide with Screenshots by Pradeep Kumar Updated March 17, 2019 OpenSUSE Leap 15 is a free and open source operating system that is ideally suited for installing your laptops, desktop and servers for both home and office use. The basics of Objective-C are supported by the GNU compiler collection. In order to utilize the full power of Objective-C together with the Cocoa /openStep environments on Linux, and to work with many of the examples covered in this book, it is necessary to install gcc, the gcc Objective-C support package and the GNUstep environment.

Prerequisites

  • OPENSTEP 4.2 User for Intel - Download
  • OPENSTEP 4.2 Developer for Intel - Download
  • Install Disk Floppy Image - Download
  • Drivers Floppy Image - Download
  • Network Driver + Patch 4 Bundle - Download
  • Parallels Desktop 9+ OR VMware OR VirtualBox (this guide is for Parallels only, however, the files work with the other virtualization programs as well).

Optional Downloads

  • Network Driver (Standalone for VirtualBox) - Download
  • Various Drivers for VMware (for the brave of you) - Download
  • OPENSTEP 4.2 Dev Patch (Standalone) - Download

Set up a VM

  1. Create a new VM inside Parallels. Select 'Other' as OS.
  2. Make sure to configure the hardware:
    • CPU: 1
    • RAM: 64 MB
    • Graphics: 64 MB with 3D Acceleration and Vsync
    • 2 GB simple Disk
  3. Configure HDD, Floppy and CD like this:
    • HDD on IDE 0:0
    • CD on IDE 1:0
    • Floppy Connected

Mount images

  1. Mount 4.2_Install_Disk.floppyimage in the floppy drive.
  2. Mount Openstep-4.2-Intel-User.iso in the CD drive.

Installation

Preparing the installation

Openstep Installation Guide
  1. Boot up the VM. When asked to enter something, do NOT enter anything and wait.
  2. Enter the number of the language you want to use. 1 is English, 3 is German.
  3. When asked to erase the hard drive, do so by entering 1.
  4. Now the installer will ask you to insert the driver disk. Do so by switching the floppy image to 4.2_Custom_Driver_Disk.floppyimage. Then press ENTER.
  5. When presented with the drivers screen, enter 7 twice until you can see the entry for Primary/Sencodary(Dual) EIDE/ATAPI Device Controller (v4.03).
    Enter 5.
  6. Repeat Step #5.
  7. When asked if you want to load additional drivers, enter 1 to continue without doing so.
  8. You will now see a white screen loading stuff. Let it run. If a kernel panics happens here, make sure the CD and HDD are connected to the correct IDE slots.

Running Setup

  1. You are now entering the setup. Enter 1 to start.
  2. Continue entering 1 until setup beings. This will only format the drive.
  3. Wait until the installer finishes. You will see a progress bar of dots and equal signs. They will fill twice.
  4. When the installer finishes, disconnect the floppy drive and press ENTER.
    This step will take a moment.
Openstep installation guide installation

Configuration

  1. OPENSTEP will now complain about missing drivers. Insert the drivers floppy again and enter 1.
  2. OPENSTEP will boot and load up.
  3. Two alerts will pop up. Simply press OK.
  4. You will see a dialog 'Summary of Devices'. Do not change anything here. Just save and confirm the dialog warning of an incomplete configuration.
    Configuring stuff already can break the VM so don't do it.
  5. In the following dialog uncheck all languages that you don't want. Leave the rest checked.
    The installer will now take a short moment to configure the packages. Even though the installer says it's NeXTSTEP, it is OPENSTEP.
  6. When the installer has completed, disconnect the floppy and restart.
  7. In the upcoming dialog, select your preferred language and keyboard layout and continue.
  8. If any dialog appears stating that the floppy is unreadable, simply press Eject and continue with the next part.

The system is now installed...

...but you're missing drivers.

The system doesn't have any graphics or networking drivers, yet. We're going to solve at least the graphics. We will now install Patch 4 that solves the Year2K-bug and introduces a VESA-driver for better graphics. Do not get scared by the number of steps. Many steps are only clicks on buttons.

  1. Click on Disk, then Eject inside the Workspace menu. If there is any complaint about something being unreadable, simply eject anway.
  2. Mount ne2k+os42patch4+vmwarefb.iso into the CD drive (you can eject the installation iso).
  3. Click on the newly visible CD icon.
  4. Copy the contents of the CD to the folder me. You do so by marking all three items and dragging them to me.
  5. Go to me and double click os42machuserpatch4.tar. This will bring up a dialog stating that the file is compressed. Click Unarchive there.
  6. Please be patient. You wil not see any progress. Wait until you see a new file OS42MachUserPatch4.pkg before you close the inspector.
  7. Open /NextApps/Terminal.app.
  8. Type in the following commands:
    su
    /NextAdmin/Installer.app/Installer /me/OS42MachUserPatch4.pkg
  9. Click Install in the now appearing Installer.
  10. Leave everything at default and click Install.
  11. When asked to confirm that the package runs programs during the operation, click Continue.
  12. When asked to continue even if some of them are installed, click Continue.
  13. When the installation has completed, reboot by double-clicking the NeXT-icon in the upper right, then Log out and finally Power off.
  14. OPENSTEP will now shut down and then tell you it's safe to turn it off. Reset the VM and let it boot up again.
  15. You may read again that the floppy disk is unreadable. Eject it once again.
  16. Run /NextAdmin/Configure.app.
  17. Click on the monitor icon in the top row. In the now appearing dialog scroll down to VESA VBE 2.0 Display Driver (v1.00). You cannot use the wheel to scroll but have to drag the scrollbar on the left. Then click Add.
  18. Click Done, then Save.
  19. Reboot once more.
  20. You will now see a blue/white window while booting instead of the Openstep logo. If this happens, you've installed the driver successfully. You should then get a 'nicely' colored desktop.
  21. We'll now change the resolution so you have more space to work with. To do that open up /NextAdmin/Configure.app once more, click on the monitor symbol and click Select in the section Display Mode. Choose a resolution you like but don't shoot too high. I recommend 1152x870.
    .
  22. Reboot again after saving and tadaa, you have more space!

Setting up Networking

The following guide has been provided by Greg Mazzeo via email who figured out a way to get networking up and running. Thanks for your help!

To enable the network adapter you have to force a certain type called rtl.

  1. Shut down the VM if it is running.
  2. Open your VM's hardware settings.
  3. Click on Boot Order.
  4. Enter the following snippet into the 'Boot flags' field:
  5. Boot up your VM again. You should have internet now 🎉. You can verify by opening /NextAdmin/SimpleNetworkStarter.app. You should not see a message that an adapter is missing.

You're done!

The VMware-file is for VMware users who like to experiment with more than the standard VESA driver.

Have fun running the system that saved Apple and probably made a whole new industry possible!

Additional Notes

The developer image provides development tools like Interface Builder and sample Objective-C code to explore. You can run all the samples by clicking the Demos folder in the toolbar.

If you have any additional tips or something to add to this guide or just want to say hi, contact me at openstep@bfx.re.

Last Update

September 2nd, 2018

Latest version

Released:

OpenStep plist reader into python objects

Project description

The author of this package has not provided a project description

Release historyRelease notifications | RSS feed

1.5.3

1.5.2

1.5.1

1.5.0

See Full List On Docs.microsoft.com

1.4.0

1.3.1

1.3.0

1.2.2

1.2.1

1.2

Download files

Openstep Installation Guide Minecraft

Download the file for your platform. If you're not sure which to choose, learn more about installing packages.

Files for openstep-parser, version 1.5.3
Filename, sizeFile typePython versionUpload dateHashes
Filename, size openstep_parser-1.5.3-py3-none-any.whl (4.5 kB) File type Wheel Python version py3 Upload dateHashes
Filename, size openstep_parser-1.5.3.tar.gz (3.3 kB) File type Source Python version None Upload dateHashes
Close

Hashes for openstep_parser-1.5.3-py3-none-any.whl

Openstep Installation Guide Kit

Hashes for openstep_parser-1.5.3-py3-none-any.whl
AlgorithmHash digest
SHA25626f2346464bc7bd71f1c1c05c7070493ae9f202cb12d95cedca2c8213bdf37e3
MD5f34e1b7cbeeb4206375cb93247db93c3
BLAKE2-25616d23e52e9fe2206990b3b5e58206ebbd32c82479dfdd292040a4f7db0b2446a

Openstep Installation Guide Installation

Close

Hashes for openstep_parser-1.5.3.tar.gz

Openstep Installation Guide Wow Classic

Hashes for openstep_parser-1.5.3.tar.gz
AlgorithmHash digest
SHA25664558dc7780f70b39fc077bab3173480b87670347f592711e1278b6028986d78
MD543d8a10d551495e57799eaec97735ac7
BLAKE2-256975625a00cce25f2fd91453460795b8c3d46b1f06980d76e925a5cd734b52cd8